How to connect to xbox live using a usb modem and ethernet cables?

i already connected my laptop and my xbox 360 with the ethernet cable... now what am i supposed to do? im using vistaHow to connect to xbox live using a usb modem and ethernet cables?
Step 1 Check to make sure your PC's wireless internet connection is working. THEN, plug 1 of your crossover cable into your





Step 2 Plug the other end of your crossover cable into your PC.





Step 3 On your PC, Go to: start, control panel, network and internet connection, network connections. There will be at least 2 connections including: Wireless Network Connection – This is your router and Local Area Connection – This is your Xbox 360. (optional) If you would like you can right click and click rename and rename it Xbox live connection.





Step 4 Right click on your Wireless Network Connection and select ';status'; and click on the ';support'; tab.





Step 5 Click on ';Details';. Copy down your DNS Servers onto a piece of paper or word document. Example: On my computer they are: 68.94.156.1 and 151.164.8.201. If your DNS Server number reads 192.168.0.1 then skip to step 11. If not then proceed to the next step.





Step 6 Go back to ';network connections'; and Right click on the Xbox Live Connection and go to properties. click on internet protocol (TCP/IP) and click properties. Elect the “use the following IP addresses:” and “use the following DNS serves addresses:” options (if they are not selected already). Enter the following info: IP address: 192.168.0.99/Subnet Mask: 255.255.255.0/Default Gateway: (Leave Blank) AND Preferred DNS: (Enter the first DNS Server you saved from the last step)/Alternate DNS: (Enter the Second DNS Server you saved from the last step)





Step 7 Now you have to set up your Xbox 360. Make sure your Xbox is on, go to system, network settings.





Step 8 Go to edit setting





Step 9 Go to IP setting %26gt; Select manual %26gt;Enter the following info: IP 192.168.0.100 (The IP from my PC seen in step 6, your may be different)/Subnet mask 255.255.255.0/Gateway 192.168.0.99. Press done and go back to ‘edit settings’, Set DNS settings for both primary and secondary as 192.168.0.99





Step 10 Just like before, go to ';Network Connections';. Right click on your Wireless Network Connection and then go to properties. Then click on advance. Check the box saying ‘allow other users to connect to internet through this computer’. A message should pop up, click yes. If an error message appears for conflict in IP address, this means you did not change the IP address of your router (DNS server). Please refer above in the manual on how to do so. If an error message appears for the specified service does not exist as an installed service then you must re-install your copy of windows. If any other error occurs then carefully re-read all the steps. If that does not work send me a Message about your problem. If no errors occur your Xbox 360 is now connected to the internet. DO NOT proceed to step 11, you are finished.





Step 11 You will have to change this DNS server number or it will conflict your IP address. This can be done by changing your router settings. The person who set up your router will most likely know how to do this. If not you can also do it by reading the router manual. Most of the routers have same setups so it should work for you. In extreme conditions if it doesn’t work you can do it using your router manual. Type 192.168.0.1 into the address bar of Internet Eplorer, This is going to take you to a screen where you have to enter your username and password. Under advanced set up go to LAN IP setup. do not click or change any DNS setups. We just want to change the IP. Change the LAN IP address to 192.168.1.1 and then the the IP address ranges also e.g. 192.168.1.2 to 192.168.1.250. the sub net mask should be 255.255.255.0 In Future, If you want to change your router setting you will have to type 192.168.1.1 in internet explorer. Take down the number 192.168.1.1, this is your DNS server now. Go back to step 6.How to connect to xbox live using a usb modem and ethernet cables?
For this you may require Ethernet cable and Dial up connection now just follow the steps below:


Step 1


Follow the usual instructions on your network hub to set it up for multiple connections to the Internet.





Step 2


Connect your computer to the network, and start the dial-up process.





Step 3


Connect an Ethernet cord to your wired network from the XBox 360. Or, if you have a wireless network, insert the XBox 360 wireless network adapter into the 360's USB port.





Step 4


Turn on your XBox 360. Allow it to start completely without loading any games.





Step 5


Check your computer's network software to be sure that the XBox 360 is found. If it is not found automatically, start the search manually. Once the network locates the XBox, go to the ';XBox Live'; option on your XBox.





Step 6


Create an XBox Live account following the on-screen directions, and have fun.